ip cam viewer settings ip cam pro set up

#Ip cam viewer settings ip cam pro set up software
#Ip cam viewer settings ip cam pro set up windows 7
#Ip cam viewer settings ip cam pro set up series

Click on ”Apply to Every Day” then “Set” to save these settings. Move down to schedule and change the timing from “00:00 – 23:59”, this will make the camera enable motion 24/7 for a specific day. The higher the number the more sensitive to movement the camera will be. Adjust the “Motion Detect Threshold” to adjust the sensitivity. Click on “Set Motion Detect Area” and drag you mouse across the picture to select the area you want the camera to detect motion, like in the picture above, and show the desire selection. Once there, click on the top check mark to enable motion and proceed to select the Motion detection Area.

To do this click on the configuration panel on the left side and locate “Alarm”. This is one of the main features that you should configure to allow the camera to record when there is movement. The Default username is Admin/Admin.Ĭlick on Configure to access the settings of the camera and begin enabling features like Motion, Schedule, Resolution, etc. Input the default IP address 192.168.1.2, or if you have changed the address then you will need to use that instead.Ī log in page will show up after the necessary Activex Files finish installing. Once you have configured Internet Explorer, the next step is to connect to the camera.

#Ip cam viewer settings ip cam pro set up windows 7

You will encounter this issue if you are using Internet Explorer Version 11, which is the latest version Microsoft is offering on computers running Windows 7 and Windows 8.Ĭonnecting to the camera for the first time

If this is the first time you are trying to connect to the IP camera then it will not show correctly. If you are performing these task from the same location were the camera is, then type the internal IP address. Select “Prompt” and click OK.Īt this point you should be all set to access your Camera.Ĥ.- Open Internet Explorer and type the IP address of your camera.

#Ip cam viewer settings ip cam pro set up software

The steps to connect to the camera are the same exempt now you will need to add the IP address of the DVR/NVR/IP Camera to the compatibility view settings of the software in order to show correctly.ġ.- Go to Start button>Control Panel and Internet Options.Ģ.- Click on the Security Tab, then custom Level…ģ.- On the next window we will scroll down to look for an option labeled “Download Unsigned ActiveX Controls”. This particular version of Internet Explorer has been optimized for better graphics, performance, etc. A window will open and you can see the current version running in your computer.

To do so, open internet explorer and click on Help>About Internet Explorer. To access your camera with Internet Explorer, is important to know what version is currently installed in your computer. Internet Explorer is the only web browser that will work without any add-ons, and is in fact the only browser supported 100% with our DVRs/NVRs and IP cameras. I suggest to only change IP Address related settings and not change the ports. Select the resultant IP address and here you can change some settings such as port, IP address, mask, etc. Open the finder and click on refresh, the result will show below: The first step to connect to the camera is to find its IP.

#Ip cam viewer settings ip cam pro set up series

The best way to approach this is by downloading and using the TP-IP Series Search Utility. These cameras come with a default IP of 192.168.1.2 or sometimes will be set to DHCP. Like any IP based device it will require to know its IP address, or at least have a way to find it. Some settings such as brightness, sharpness, WDR, etc need to be adjusted depending of the environment where the cameras are mounted.

The settings and access setup is the same throughout the entire TP-Series Cameras. In my opinion and as a rule of thumb I always configure each device first to avoid any misconfigurations, then I will end connecting these to the recorder.įor this demonstration I will be using an IPID-TP2MPIR50L2812-W. Some ONVIF products require to have certain features turned ON before integrating with any equipment that is not from the same brand. One of the greatest thing about this new line is the variety of models we are offering from bullet style, varifocal & fix lenses to small ball domes that can be installed in no time.Īs I mentioned before, Onvif (Open Network Video Interface Forum), is an Open Industry aimed to facilitate the communication of IP based video products with other devices that are not necessarily from the same manufacturer. Today I will introduce our new line of ONVIF cameras (our TP Series) with a new and elegant style, that promise to be an easy and great setup for your CCTV needs. Onvif Cameras have become very popular these days and many companies are adopting this new open protocol to integrate with other equipment brands.